DBR Rigid Frame Delta-Bar Ripper

The DBR is designed as a “systems”  single pass, multi-operations machine

  • 3.0m and 4.2m wide 3PL mounted deep ripper that has a unique in-built towbar for pulling a secondary cultivation implement and/or seeder behind it for a single pass operation
  • Massive 200×200 SHS toolbar – 9 or 12.7mm thick
  • Low Inversion staggered shanks minimize “slabbing”, minimise soil mixing and reduce power requirements, while retaining compactness
  • Fitted with 32mm thick Bis400 shanks on 600mm centres with 800mm of toolbar clearance, and with a magazine styled shear pin arrangement on a heavy duty toolbar
  • Fitted with a heavy duty Crusher roller for depth control and soil levelling
  • The Delta Bar is a contractor duty machine that is hot dip galvanised, and is designed and made to last in Australia
Make an Enquiry

Or Call Us : 0428 389 531

The Concept

To design a deep soil ripper that:

  • Is versatile – can be used stand-alone or as a component in a single pass, multi-operation system
  • Has low soil inversion
  • Removes compaction up to 500mm deep
  • Is capable of opening up virgin ground
  • Minimises “slabbing” while remaining compact
  • Is compact and agile for use in a multi-operation system

Advantages

  • Compaction removal up to 500mm deep
  • Compact design with lower power requirements
  • Low Inversion ripper shanks and point assembly
  • Ability to open up virgin country
  • Tool-less shearpin protection
  • Reduced soil compaction and improved soil structure
  • Improved surface finish
  • Simple, reliable, productive and cost effective
  • Designed, engineered and fabricated for Australian farmers right here in Australia

Specifications

DBR3001 and DBR4201
Working Width 3000mm / 4200mm
Transport Width 3000mm / 4200mm
Power Requirements Dependent on soil conditions, speed, depth, and secondary equipment

DBR3001 – 120hp-300hp

DBR4201 – 160hp-350hp
Construction 200 x 200 x RHS Toolbar

DBR3001-9mm thick

DBR4201-12.7mm thick

350 structural plate, Bisalloy 80 plate
Shanks Low Inversion, 5 or 7 tynes, 800mm toolbar clearance, 600mm spacings, 250mm stagger
Tyne Breakout 4.5 Tonne
Shear pin Magazine styled, tool-less quick replace
Tyne point Knock-on points with various widths available; fitted with shin guards; various bolt on hillers, knive blades all available
Mount Category 3
Drawbar Designed to tow a set of off-set discs, high speed discs, roller drill etc
Roller HD Crusher roller, 500mm diameter, adjustable height with ratchet rams, optional hydraulic height control, 60mm UKF bearings
Finish Hot dip galvanized/2-pac enamel
Options Air Seeder, strip till row seeders, liquid fertiliser injection